JP CASTER

设计载重：

Caster Design：

1）支架最大载重5500kg

Kingpingless Castr Yoke Load 125000 lbs

2）聚氨酯单轮最大载重4400kgs

Polyurethane on Cast Iron Wheel Load 100000 lbs

3）整车按照4只脚轮最大载重 12300kgs

4/pcs Caster Maximum load 20418Lbs 28000lbs

4）双排轮设计能够更加有效保障安全系数

Dual Wheel Caster Offer High Weight Capcities

5）牵引速度6 Km/H

Loss by abrasion 3.72 mi/H

生产标准.:

Production standards.

①按照图纸未标注公差为 + 1.5mm

limits unless otherwise specified 0.06"

②采用抛光工艺去除所有毛刺

All edges to be chamfered shot shot blasted

③产品表面黑色喷涂光亮,颜色均匀

Black Spraying Surface Treatment

④PU采用聚氨酯 95A材质生产

Polyurethane Wheel 95 ShoreA

CAUTION:

当从角落放置或移除脚轮时，使用叉车提升或降低角落配件。人员应远离相邻区域，以避免意外坠落时受伤。

When placing or removing casters from corners, use a fork truck to raise or lower the Corner fitting. Personnel are to stand clear of adjacent areas to avoid injury if accidentally dropped.

脚轮可允许负载在不平整的表面上移动和载重。在分离牵引车之前，沿牵引方向锁定旋转脚轮并用楔块固定。牵引时，在连接牵引车后和开始牵引前，牵引端的旋转装置应解锁。

Casters can allow loads to move on unleveled surfaces and crush personnel. Lock swivel casters in towing direction and chock before detaching tow vehicle. When towing, swivels on

tow-end should be unlocked after connecting tow vehicle and before starting tow.